PDA

View Full Version : a possible alternative for mounting double or single DIN head units



beat boi
27-10-2004, 05:37 AM
I'm not sure if it is possible to do but I was thinking that the rack and shroud thing from a toyota corolla could be used to mount a head unit in the top of the dash of the beat. They come in both double or single DIN the one in the pic below is a single DIN. I think they would look good if it would work. Post back with any thoughts.

Paul w
27-10-2004, 01:39 PM
The problem is there is a big thick metal bar running the width of the car just in the wrong place!

Someone tried it (who was it that cut a whole in his dash?)

PW

beat boi
27-10-2004, 02:30 PM
ok cool thanks for that info. It will stop me from discovering that when i get my beat

tinytim
27-10-2004, 11:05 PM
Sorry to contradict Paul but that is just where I've fitted my single din unit. The bar is in the way if you cut the hole in the passenger side console.
I sliced down both sides of the lump in the centre of the dash, lifted it, put a din cage in there and fiberglassed it to give a raised dash. The radio is supported at the back by the centre vent ducting.
I was holding off on the pics until I had the seats done but I'll post a couple of the dash. You guys can let me know what you think of my color scheme:D

Adam
28-10-2004, 02:33 AM
We must think alike cause I did the same thing Tim. I saw it done on a beat that came off the boat from Japan, so I covered the whole in the dash and started cutting into the center console. :)

tinytim
28-10-2004, 02:47 AM
Come on then Adam, lets see a pic.
You show me yours and I'll show you mine.

Adam
28-10-2004, 02:48 AM
wait there a min I'll go into my car and take a pic

Adam
28-10-2004, 03:36 AM
Its not finished yet but here it is

tinytim
29-10-2004, 04:22 AM
Ah!
mine is on the top, sitting on the vents. Pic soon I promise.

tinytim
30-10-2004, 12:43 PM
OK not finnished, I still need to change the carpet and the matts, but here is where I put the stereo.

beat boi
30-10-2004, 04:07 PM
that looks cool. good job dude.:bounce:

Midship
30-10-2004, 06:58 PM
Great job with the radio.. must say im well impressed! lookin good :D

Adam
30-10-2004, 07:56 PM
Wow Tim that looks well.

A really good job, you have a talent.

tinytim
31-10-2004, 11:56 AM
Thanks guys,
It's nice to get positive feedback. I took a bit of a gamble with the colours but it seems to work. The problem I have now is finding a third colour for doing trim. Needless to say when you get up close there are a few flaws and some beading is required for these as well as to highlight a few areas. What colour????
Does anyone have anything other than a Beat stereo that goes in the hole?

beat boi
05-11-2004, 12:40 PM
I'f your interested in mounting some gauges you could instal one of these
http://www.rsmach.com/consol.html
or you can try and obtain the tray or what ever it is that comes in the beats without radios.