PDA

View Full Version : Newbie here, hello from Canada!



Whitesol
15-10-2009, 03:37 AM
Just dropping in to say hello and share my Beat project with you all. I'm not one for keeping things stock so after owning my beat for only 4 months I pulled the E07A out in favor of a different platform. Unlike Honda in the UK, the dealerships here only scratch their heads when I give them Beat parts numbers.
So for my first swap I've opted to use a B-series engine, a 1993 B16a SIR II to be specific. The majority of the swap is now complete, and I should be up and running very soon.

My Honda-tech build/Beat info thread can be found HERE (http://www.honda-tech.com/showthread.php?t=2238661)

Regards,
-Scott

My Beat...
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/8d7c_20.jpg

E07A out
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/EngineRemoval-07.jpg

B16a in
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16-91.jpg

Whitesol
15-10-2009, 03:38 AM
more pics
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16-89.jpg

Fabricated rear crossmember and suspension
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16-93.jpg

Modified stock intake manifold
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16_102.jpg

Whitesol
15-10-2009, 03:39 AM
Custom length driveshafts
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16_104.jpg

Fabricated a new fuel tank
http://i2.photobucket.com/albums/y40/WhiteSol/Beat/Beat16_128.jpg


Aaandd.. hopefully there is more to come. I hope to build a hardtop and roll-bar in the winter months.

bigB
15-10-2009, 05:43 AM
Hey Scott, I've been watching your build and I like your style. :)

unclejemima
15-10-2009, 07:07 PM
Sick build man. I too have been watching your build and drooling in awe.
Hey, are you from Calgary?

The motor is N/A, right?

Keep up the awesome work, and keep us posted!

TADO
15-10-2009, 10:14 PM
hi whitesol
nice to see you on here - think a lot of us have been watching your build in amazment and anticipation!

maiku
16-10-2009, 05:57 AM
where are my parts scott?!!

my yellow is dead in the garage :awwww:

Whitesol
16-10-2009, 09:31 AM
Hey Scott, I've been watching your build and I like your style. :)

Thanks for the compliment!


Sick build man. I too have been watching your build and drooling in awe.
Hey, are you from Calgary?

The motor is N/A, right?

Keep up the awesome work, and keep us posted!

Yep I am in Calgary, the engine is ready for forced induction but it won't be turbocharged or supercharged while I have it.

If you're out here too we should set up a Beat cruise in the spring (if we get a spring), I'm in contact with a few other Beat owners in Alberta.



hi whitesol
nice to see you on here - think a lot of us have been watching your build in amazment and anticipation!

Thanks, glad to be here!


where are my parts scott?!!

my yellow is dead in the garage :awwww:

As soon as this is finished you'll be sending me your address ;)
I thought you were still running though? Did you have some sort of catastrophic engine failure?

maiku
17-10-2009, 01:41 AM
i think the clutch seals failed
i couldn't release it
had to get it towed home :awwww:

Whitesol
17-10-2009, 03:48 AM
That sucks, it could be 1 of 4 things

From most to least likely..
-clutch master cylinder failure
-clutch slave cylinder failure
-broken clutch pressure plate
-bent shift fork (internal component of the transmission)

marsvolta1fan
02-01-2010, 05:52 AM
my fav. honda project.

keep it up scott.

TADO
02-01-2010, 01:31 PM
just been catching up on this - thanks for the bump marsvolta1fan - truely inspiring!

marsvolta1fan
05-01-2010, 05:48 PM
just been catching up on this - thanks for the bump marsvolta1fan - truely inspiring!

no worries. Im just a BIG fan of the honda beat.
im actually working on importing one, just saving more cash.
and income tax is soon so i should have enough =D

Would you happen to know any sites/blogs about the beat.
i pretty much seen every picture on flickr, google, yahoo, and bing! haha
but blogs and forums have unseen pix.

TADO
06-01-2010, 02:39 PM
hmm, the cozy-lights blog usually has interesting stuff on it:
http://blog.livedoor.jp/cozylights/?blog_id=1560551
theres LOADS on minkara and japhoo too - this chap always has interesting pics and plenty to go exploring round:
http://minkara.carview.co.jp/userid/231334/blog/
and korai's blog is always worth a look:
http://ancient-beat.cocolog-nifty.com/

HTH!
:)
mike

Wh1teLeopard
06-01-2010, 03:05 PM
And of course Mike's blog too haha

(link under Tado's red beat) hehe

marsvolta1fan
06-01-2010, 10:22 PM
hmm, the cozy-lights blog usually has interesting stuff on it:
http://blog.livedoor.jp/cozylights/?blog_id=1560551
theres LOADS on minkara and japhoo too - this chap always has interesting pics and plenty to go exploring round:
http://minkara.carview.co.jp/userid/231334/blog/
and korai's blog is always worth a look:
http://ancient-beat.cocolog-nifty.com/

HTH!
:)
mike

wait a minute your the guy with the honda beat AND the integra type-r!?

haha i wish i was you, you have my 2 favorite cars. I have an RSX but wish it was a type-r, and im actually working on importing a beat myself, money issues. =/

thanks for the blogs/forums ill check them out ASAP

Adam
01-03-2010, 08:18 PM
That sucks, it could be 1 of 4 things

From most to least likely..
-clutch master cylinder failure
-clutch slave cylinder failure
-broken clutch pressure plate
-bent shift fork (internal component of the transmission)

Very unlikely its all that bad, if its one of the cylinders, just rebuild it with a new seal, look at the parts manual its the same as an accord if I remember.

But try for the moment putting some fluid in there and bleeding it.

If its original honda, its not gonna be the plate or fork