PDA

View Full Version : Distributor



Dion
17-09-2002, 01:03 PM
Hi all,

I've put a new distributor on my Beat. Surprisingly, it was quite straight forward to do.

I was getting very concerned as the car was mis-firing at low revs.

The car is running really well now. No mis-fire.

The old distributor was covered in brown dust and when turned, made a grinding sound. Although, it still turned quite freely.

Now it's just a matter of getting a refund from Honda UK.

Can anyone tell me how many degrees adjustment there is by moving the distributor in situ, with the engine running?

Dion.

Steve_M
17-09-2002, 08:31 PM
Hi Dion

Your gonna need a timing light to set the timing.

With the engine warm, you need to first bridge the Check connector (yellow covered plug) (same as the one for fault codes) this put the timing back into base mode.

Then looking down in the appature of the bell housing (after removing rubber plug) you need to set the timing so the RED mark aligns with the pointer. This mark is 20 degree BTDC.

The white mark with the T by it is TDC.


HTH

Steve M

adrianp
21-09-2002, 07:23 AM
Hi Steve,

Quick question then...

Which of the marks is the 20deg one?? is it the Dot or the Line further along??

Sorry to be a pain but I want to make sure mine is set properly just incase thats the problem with mine not reving properly...

Ta

Adrian
UKHBC No.59
Ipswich