PDA

View Full Version : Garage Sale



Beatproducts
15-10-2002, 03:21 PM
Due to a mad life style and the new baby which I have it is time to admit defeat and sell the contents of my garage.

I have many beat items here is a few of them.

2 hood frames one with very good original hood on it.

2 front bumpers

2 rear bumpers

front suspension

rear suspension

shocks with springs only covered 40,000Km's

Break calipers (all four)

One engine requiring a re-build (wit the necessary parts)

one working gear box

One speedo binacle

Many seats, Loads of Zebra

Window glass

One un used spare wheel

2 starter motors

1 OK dizzy

Performace HT leads 5 sets left

1 strut brace

Plus many other itmes need to do a list.

No reasonable offer refused!!!

adrianp
15-10-2002, 06:36 PM
Hi Phil,

Sorry to hear you are leaving the beat scene temporarily... Hopefully you will be back when the little one gets a bit older...:D

But, in the mean time... How much for the strut brace and the instrument binnacle???

I'm more interested in the strut brace than anything, but if the price is right with the other bit then I might have a use for it for an idea I have...

Hope everything goes well

Adrian.
:bounce:

Beatproducts
16-10-2002, 11:02 AM
Strut brace is £65 + P & P

The Binacle working and complete is £100 + P & P (this includes all clocks and lamps).

All the best

Phil

laserchains
16-10-2002, 07:45 PM
How much for a set Ht leads? Marcus.

Beatproducts
17-10-2002, 09:24 AM
Clearence Price of £40 including P&P.

Phil

Dion
19-10-2002, 12:33 PM
Hi Phil,

Hope you're coming back soon.

How much would a front bumper be? One in red would be perfect.

And how much for the engine, and is it complete?

Cheers,

Dion

Beatproducts
21-10-2002, 09:02 AM
I have a red one here with some damage (needs a re-spray) which is going for £60 & A red one on the way from Japan which will be going for £95. Remember these parts are now not availiable brand new!!!!

Engine has been spripped down ready for re-bulid with the parts to do the re-build £395. Parts include:

Three new oversized psitons
All piston Rings
Re-built cyclinder head
All bottom end bearings
New cyclinder head bolts
New Head gasket & rocker cover gasket.

Just needs a re-bore and rebuild!!!

Phil

Dion
21-10-2002, 05:50 PM
Hi Phil,

Do you have a pair of side repeaters, and how much are they, if you do?

Thanks mate.

Dion

Beatproducts
22-10-2002, 09:07 AM
Yes £10 each!!!

Dion
22-10-2002, 10:39 AM
Hi Phil,

I'll send you a cheque today for 2 side repeaters.

Thanks mate.

Dion

rita the beat
28-10-2002, 11:07 AM
Hi Phil,

I bought a Honda Beat recently. The body work is fantastic, but the roof is a bit worn and there are studs missing. Do you still have a roof for a Beat for sale or do you know anywhere that restores or makes new roofs.

I hope to hear from you soon.

Thank you


Rita

Beatproducts
28-10-2002, 11:39 AM
I have a refurbished hood (original) Complete with new rear screen £150.

I have can supply re-made new roofs for £375.

Regards

Phil

Andrew Fisher
28-10-2002, 09:43 PM
Do you have any zebra floor mats and/or a radio?

Many thanks

Andrew Fisher

bridget
28-10-2002, 10:31 PM
Hi,

I am interested in zebra seats or covers for my beat. Do you have any available?
I'ld had my beat for over four years now and the seat is beginning to wear.

Thanks

bridget

Beatproducts
29-10-2002, 09:15 AM
Bridget yes I have covers beat for different secions of the seat. If you want whole covers it will cost much more than just some material for a repair let me know what is worn or what you wnat to do??

Andrew I have no zebra mats left but I have one 40W audio unit left £200.

Best Regards

Phil

bridget
03-11-2002, 12:26 AM
Hi Phil

Thanks for coming back.
I have a small tear on the back of the drivers seat from wear and tear - would this cost much? - it s about say 10cm2 altogther I'm guessing.
Too cold outside to check now!

Thanks

Bridget

Beatproducts
04-11-2002, 10:30 AM
Bridget,

If you know a good auto trimmer you will require two strips of zebra to repair the back upright part of the seat. Which need to be stitched in. The repair strips will cost £25 inc. P & P.

Regards

Phil

bridget
04-11-2002, 07:57 PM
Hi Phil

Thanks for the info. I will checkout the area for auotrimmers - and hopefully get back asap.
Thanks

Breda

Adam
05-12-2002, 07:19 PM
Do you still got one. Cause I can't see anything out of mine. Let me know a price inc p&p. Thanks

Beatproducts
06-12-2002, 09:55 AM
Yes, £70 + £15 P & P to Ireland, this is base on an exchange service with you returning your old window once you have fitted the new one!!!

Regards

Phil

Adam
06-12-2002, 07:06 PM
I will get back to you soon.

Midship
12-12-2002, 08:21 PM
Have sent you a PM paul

Midship
12-12-2002, 08:23 PM
geting names mixed up :suicide: sorry phil

Jason
16-01-2003, 03:17 PM
I was wondering if the alloys were still available? What is the price, weight & options on getting them to Melbourne Australia?

Regards

Jason :cool:

BDINGLE
24-01-2003, 11:07 PM
Phil,

Have you got a radio aerial? - I'm still having problems with mine.
If so how much etc....

Bob

Beatproducts
27-01-2003, 02:30 PM
Yes I think so I will have to check and let you know???

Phil

Amy
02-03-2003, 01:42 PM
Hi,

I am looking for a good condition hood (with see-thru window!), no holes, tears etc for my little red Beat as well as an original stereo or at least one that will fit the gap in my dash!

Sensible prices paid for sensible offers! Hopefully someone out there can help?

Please email me at Flossy6781@aol.com.

Thanks!:)

Robin
02-03-2003, 08:23 PM
HI do you have any carpet for the boot of the beat?

Ash
24-03-2003, 11:22 AM
Phil
I need rear window -mine is completely clouded.

Can you give me the procedure, where to send payment, how to take mine off etc.

Thanks
Ash
n.ash@usa.net

aqgardezi
31-03-2003, 09:01 PM
Hi,

I need ECU, Throttle Body Sensor, MAP Sensor, IAP Sensor and also all the rubber of hood with nuts n back clean screen. I also need hard top. Plz let me know price. Thanks.

mazza33
26-08-2003, 02:17 AM
Hi, do you still have any Beat bits for sale?

sloppie
24-01-2004, 12:35 AM
hi mate,
do you remember me??? been a while!!!! this is steve from oxford, i still have the yellow beat (with new roof we fitted one saturday!!)
don't need any bits at the moment but i thought i would just say hello and how are you and your family??
hope to speak again one day.

bye for now

steve

:bounce:

Beatproducts
26-01-2004, 09:36 AM
Nice to hear from you !!!

Family is fine, car not so fine been doing some track days with Richard already blown up his Nissan Turbo and lunched the clutch on my old Honda CRX, yes I am playing with one of those at the moment!!!

Just posted a new thread with what I have left!!!

See you

Phil

GARY SWINDEN
27-01-2004, 06:10 PM
Hi Phil,
Reserve me a set of leads please, I'll send you a cheque when you send me your address
Good luck
Gary