Can't find any info on doing this , my drivers side window need to be adjusted as it's sitting far out from the seals when closed , how do I go about adjusting this .
Cheers
BRIAN
Printable View
Can't find any info on doing this , my drivers side window need to be adjusted as it's sitting far out from the seals when closed , how do I go about adjusting this .
Cheers
BRIAN
(Shop manual pages 14-11 to 14-15)
I would start with door adjustment e.g. is door flush with body work / upto max 1mm proud. Adjust striker if not.
Are seals distorted e.g depressed in - either replace seals or fill void with foam/silicon strips to bulk out seals.
Check glass alignment to frame using measurements (SM page 14-11)
adjust guide rail angles (SM page 14-13) with rail adjusters and glass guide positions.
Hmm never thought of door being out of line , it looks ok but def worth a look
Thanks Steve
I just adjusted my door strikers like Steve said, no water getting in at all now!