Search:

Type: Posts; User: stu g

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: New ECU

    by stu g
    Replies
    4
    Views
    143

    Hi, there are tons of threads about refurbing...

    Hi, there are tons of threads about refurbing these. It is common for the capacitors to blow and leak over the circuit board. Replacing the capacitors and repairing the board usually does the trick....
  2. If the rad is leaking you can often solder it up...

    If the rad is leaking you can often solder it up rather than junk it.
  3. Replies
    3
    Views
    245

    If you're in Japan then just get one on Yahoo...

    If you're in Japan then just get one on Yahoo auctions. There are always roofs on there.
  4. Replies
    3
    Views
    239

    OK, so mine cracked a few years ago, and like me...

    OK, so mine cracked a few years ago, and like me you probably found out that Honda have stopped supplying them. Eventually I bought a pattern one online from Japan, and got some relatives to pack and...
  5. Replies
    3
    Views
    369

    Now that is cold! I find the Beat beaches itself...

    Now that is cold! I find the Beat beaches itself quite easily in snow drifts (because the floor is so low), but on slippery surfaces the handling is a dream - its so predictable and controllable in a...
  6. Replies
    2
    Views
    709

    When I bought my latest Beat 4 years ago it had a...

    When I bought my latest Beat 4 years ago it had a problem of the error light coming on, but being weak/fady (rather than the light being fully on), and not having an error code. It was worse when it...
  7. Replies
    2
    Views
    903

    Hi Wild and Foamy, Unlikely you'll find anything...

    Hi Wild and Foamy,
    Unlikely you'll find anything local!
    Yahoo actions (Japanese ebay) have the bits you need, and you can get buyee to send it to you.
    Go go:
    https://auctions.yahoo.co.jp/

    And...
  8. Replies
    4
    Views
    1,368

    I had this same problem last year, and Honda have...

    I had this same problem last year, and Honda have run out of them. I ordered up a pattern one and had it sent to my relatives in Japan, who then got it picked up by a firm who properly boxed it up,...
  9. Replies
    2
    Views
    895

    OK, this could be a number of things: Are you...

    OK, this could be a number of things:
    Are you burning oil?
    Was the engine cold when tested?
    Is the ECU working properly?
    Are the spark plugs working properly - unburned fuel could give a high...
  10. Replies
    2
    Views
    935

    Couldn't jp-carparts send you one quicker?

    Couldn't jp-carparts send you one quicker?
  11. Replies
    2
    Views
    978

    I'm afraid I don't have a spare, but looks like...

    I'm afraid I don't have a spare, but looks like something you could fabricate quite easily to get you out of a pickle.
    19 could just be a few washers put together
    20 is the trickiest, but with...
  12. Replies
    7
    Views
    1,645

    Check all your bushes and linkages. I had the...

    Check all your bushes and linkages. I had the same problem on a Renault Scenic on which I'd just put a new wishbone. It turns out that one of the bushes was not pressed in right at manufacture so the...
  13. Try this rotor arm instead: 30103-P65-006

    Try this rotor arm instead: 30103-P65-006
  14. Replies
    31
    Views
    6,327

    Parts wise, I have found that jp carparts are...

    Parts wise, I have found that jp carparts are pretty good. If you have the part numbers you can order up parts from any Honda dealer (at least you can in Europe, not sure about the US).
  15. Replies
    31
    Views
    6,327

    ECU is in the driver compartment, behind a panel...

    ECU is in the driver compartment, behind a panel behind the passenger seat. There are about six capacitors that need replacing because they blow. Even if you think they look fine, they are so cheap...
  16. Replies
    6
    Views
    1,628

    I don't have any spares, but when I got a new...

    I don't have any spares, but when I got a new Clarion CD unit on ebay there were loads available.
  17. Thread: S660 in the UK

    by stu g
    Replies
    2
    Views
    976

    They're going for around 10k+ on Yahoo auctions,...

    They're going for around 10k+ on Yahoo auctions, by the time import tax, VAT, shipping, and SVA are taken in to account, you're probably looking at 15k. New base models (once you get past the...
  18. Thread: S660 in the UK

    by stu g
    Replies
    2
    Views
    976

    S660 in the UK

    There is presently an S660 on Autotrader (under Honda S800). I wasn't aware there were any in the country.
  19. Thread: Best ECU

    by stu g
    Replies
    7
    Views
    2,300

    I'd try replacing them again, and looking for a...

    I'd try replacing them again, and looking for a dry solder before splashing out on a new one.

    Failing that you can browse the Yahoo auctions site for used ones, and there are services which will...
  20. Thread: Best ECU

    by stu g
    Replies
    7
    Views
    2,300

    Are you sure its not just the capacitors in it...

    Are you sure its not just the capacitors in it which have blown? They can be replaced by anyone handy with a soldering iron.
  21. Thread: Stuck Fuel Gauge

    by stu g
    Replies
    2
    Views
    996

    You seem to have tested the right things, and...

    You seem to have tested the right things, and I've no idea why the cam timing belt change would have impacted this. If the wiring was disturbed I can't envisage why the gauge would get stuck at 3/4....
  22. Replies
    60
    Views
    15,625

    Engine Manual 4 9 Metal selection, mating...

    Engine Manual 4 9 Metal selection, mating
    Conrod Bearing
    Caution:
    When you change the conrod bearing use the table to look up the crankshaft pin and conrod marks.
    When you fit the bearing,...
  23. Replies
    60
    Views
    15,625

    OK, so here is page 4 -8. Sorry that the tables...

    OK, so here is page 4 -8. Sorry that the tables don't paste in well. You might have to cut and paste them out in to Excel.

    Engine Manual 4 – 8 Metal selection, mating
    Main bearing
    Caution
    • If...
  24. Replies
    60
    Views
    15,625

    I do wonder if there would be any demand for the...

    I do wonder if there would be any demand for the whole thing in English?
  25. Replies
    60
    Views
    15,625

    Here you go, hope this helps: Engine Manual 4...

    Here you go, hope this helps:

    Engine Manual 4 - 7: Oil clearance measurement
    Main bearing
    Caution
    • Ensure that you measure in the correct axis.
    • Don’t measure the crankshaft on an...
Results 1 to 25 of 101
Page 1 of 5 1 2 3 4