Results 1 to 4 of 4

Thread: CAT / Exhaust

  1. #1
    Join Date
    Jul 2006
    Location
    Ipswich
    Posts
    27

    CAT / Exhaust

    Hello everyone.
    Was out enjoying the sun today when without warning sounded like the exhaust fell off!!! I've not been able to have a proper look but a quick glance revealed that the pipe between the exhaust joint and the cat has completely sheered. Is there another joint at the cat? Can I remove the cat covers (there appears to be some bolts)? I'll try to post some pictures tomorrow but any initial thoughts would be most welcome. Alan.

  2. #2
    Join Date
    Nov 2008
    Location
    Canadian prairie
    Posts
    221
    hope this helps
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Picture 1.jpg 
Views:	145 
Size:	63.5 KB 
ID:	1986  

  3. #3
    Join Date
    Jul 2006
    Location
    Ipswich
    Posts
    27

    cat/exhaust

    Thanks for the diagram. Having now had a look (of course I can't get the heat shields off!!) it would appear the faulty part is 11 on the diagram ie the short pipe that connects the cat to the exhaust. The flange appears to still be attached to the cat but the pipe has "pulled out". Should the flange be welded to the pipe? or does it just pull the two pieces together? The bell end of the pipe appears to be intact. Any answers gratefully received. Alan

  4. #4
    Join Date
    Jul 2006
    Location
    Ipswich
    Posts
    27

    This bit

    This bit. Looks to me like it should be welded. Anyone know where I might get this done in the Ipswich area? Alan
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	this bit.jpg 
Views:	151 
Size:	32.5 KB 
ID:	1987  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •