Results 1 to 4 of 4

Thread: Window adjustment

  1. #1
    Join Date
    Jul 2008
    Location
    Dublin Ireland
    Posts
    244

    Window adjustment

    Can't find any info on doing this , my drivers side window need to be adjusted as it's sitting far out from the seals when closed , how do I go about adjusting this .
    Cheers
    BRIAN

  2. #2
    Join Date
    Aug 2002
    Location
    Kent
    Posts
    1,500
    (Shop manual pages 14-11 to 14-15)

    I would start with door adjustment e.g. is door flush with body work / upto max 1mm proud. Adjust striker if not.

    Are seals distorted e.g depressed in - either replace seals or fill void with foam/silicon strips to bulk out seals.

    Check glass alignment to frame using measurements (SM page 14-11)

    adjust guide rail angles (SM page 14-13) with rail adjusters and glass guide positions.
    Last edited by Steve_M; 28-01-2014 at 09:41 AM.
    Steve M
    __________________

    Its all gone Norfolk!!!
    Now in the Lotus position.

  3. #3
    Join Date
    Jul 2008
    Location
    Dublin Ireland
    Posts
    244
    Hmm never thought of door being out of line , it looks ok but def worth a look
    Thanks Steve

  4. #4
    Join Date
    Sep 2013
    Posts
    22
    I just adjusted my door strikers like Steve said, no water getting in at all now!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •