(Shop manual pages 14-11 to 14-15)
I would start with door adjustment e.g. is door flush with body work / upto max 1mm proud. Adjust striker if not.
Are seals distorted e.g depressed in - either replace seals or fill void with foam/silicon strips to bulk out seals.
Check glass alignment to frame using measurements (SM page 14-11)
adjust guide rail angles (SM page 14-13) with rail adjusters and glass guide positions.
Last edited by Steve_M; 28-01-2014 at 08:41 AM.
Steve M
__________________
Its all gone Norfolk!!!
Now in the Lotus position.