Results 1 to 8 of 8

Thread: Rebuilt Honda Beat engine and aftermarket front bumper, sideskirts, rear lip spoiler

  1. #1
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431

    Rebuilt Honda Beat engine breaking

    Having a clear out so have the following for sale

    Rebuilt e07a Honda Beat engine from my old car, cambelt snapped so the following got replaced

    All inlet and exhaust valves
    Thermal inlet gasket
    Cam seal
    All valve stem oil seals
    Timing belt
    Water pump
    Both Tensioners

    Only ran it for 15/20 minutes tops but never used again as the car had a major electrical fault so I broke the car, engine has no starter motor, althernator, aircon pump, injectors or fuel rail. It's pretty much bare apart from the throttle bodies and airbox. Top half of the exhaust manifold is still on which has new gaskets, looking for 450 ono

    Located Oswestry, Shropshire. Willing to break the engine for parts

    Last edited by Gavin; 24-01-2017 at 06:27 PM.

  2. #2
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    updated post
    Last edited by Gavin; 24-01-2017 at 06:28 PM.

  3. #3
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    Prices are negotiable, but please bear in mind it's pick up only due to kit being fragile and engine being heavy.

    Could pallet the engine up for delivery but you would need to arrange that.

  4. #4
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    Bump everything for sale still open to sensible offers

  5. #5
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    Right I am happy to break the engine for parts so the following will be for sale

    Rebuilt head with all inlet and exhaust valves replaced, Cam seal, all valve stem oil seals, very mild port matching 220 posted to anywhere in the UK

    Thermal inlet gasket 25 posted

    Near enough new timing belt kit never had any road miles put on it and was only ever ran on the engine for 20 min max consists of timing belt, water pump and
    both Tensioners 120 posted anywhere in the UK

    Near enough new Headgasket as above 25 posted anywhere in the UK

    Flywheel with good clutch 50

    Bottom end 80 collection only due to weight

    All prices are pretty negotiable as the parts need to go
    Last edited by Gavin; 24-01-2017 at 06:39 PM.

  6. #6
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    bump open to sensible offers

  7. #7
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    Engine sold pending pick up

  8. #8
    Join Date
    Mar 2009
    Location
    Shropshire
    Posts
    431
    Engine now sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •