Constant check light with bridged service connector
trying to turn off my check light (or at least find out what's wrong with it) and i get no blinks/flashes when the service port is connected
i know i have bridged it successfully as i can turn it on and off and i get a change in engine tone (due to the ignition timing going from static/mapped) just no flashes
i've removed the 7.5A fuse as per the reset procedure, still nothing!
any ideas? i searched on here and a few threads popped up but none of them had resolutions
Engine runs absolutely fine. tempted to remove the bulb.....
Funny you say that. Replaced my dash bulbs with leds. After a few weeks check light came on but car ran perfectly. Got sick of the red glow and replaced with normal bulb. Problem solved... Wait a minute. Might have the same issue with me exhaust temp one now.....
Last edited by Mobius; 19-04-2017 at 01:16 PM.
exhaust temp one i grounded a long time ago :lol:
Mine was the same. Had the capacitors replaced on the ecu and I'm now getting a code for the first time when I bridge the service port. I also checked and cleaned any grounds I came across too.
interesting. have you got a guide to swapping the capacitors?
ordered 2 full sets of from this listing for £6.something delivered. seem to be better quality than the maplin equivalents
spoke to these guys and they said they can do the work pretty easily/cheaply
will whip the ECU out over the weekend and get it to them. will let you know how i get on