Results 1 to 5 of 5

Thread: exhaust catalyst sensor

  1. #1
    Join Date
    Mar 2011
    Location
    Northants, UK
    Posts
    132

    exhaust catalyst sensor

    My mate's renewing stuff in the engine but a bolt sheered when he removed the catalyst. This is the only part from Honda Japan he can't order. He will attempt to drill it and use a bolt but in case he has no joy I said I'd ask here. Cheers.

  2. #2
    Join Date
    Feb 2014
    Posts
    163
    the three bolt flange?

    i had to drill all three of mine out in the end!

  3. #3
    Join Date
    Mar 2011
    Location
    Northants, UK
    Posts
    132
    Thanks, I suspect it's that one. He's hopeful he can do it..... We're just waiting for a few more parts to arrive and then he'll rebuild the engine.

  4. #4
    Join Date
    Feb 2014
    Posts
    163
    regardless you'll have to drill/press them out. you could use a generic stud of the same spec, i just tacked 3 bolts in place so they were captive.

    part number for stud is - 90065-PC0-000

    they are 10x35.5

  5. #5
    Join Date
    Mar 2011
    Location
    Northants, UK
    Posts
    132
    Thanks, I will pass on your advice.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •