Results 1 to 3 of 3

Thread: Tonneu front stud

  1. #1
    Join Date
    Apr 2017

    Question Tonneu front stud


    I can't fit my tonneau front stud to the car (the same stud you have to undo when folding the roof).

    I want to either change the stud or buy a new tonneau ...

    But If I have a look here ->

    It looks like the same stud as on my tonneau.

    Am I missing something?

  2. #2
    Join Date
    Mar 2011
    If I remember correctly from my first Beat (9 years ago so I may be wrong) Honda used 2 different fittings for the front of the roof. The original was a Tenax fixing that was replaced on later models with a simple stud When I tried to order a replacement pair of fixings (I had the same problem as you) Honda supplied me with the later stud type, the original part had been superseeded.
    It sounds like you have a late tonneau and an early roof. The simple solution would be to buy a pair of fixings from Honda (90306-SS1-505) and replace the fixings on the hood.

  3. #3
    Join Date
    Aug 2002
    As fxdlidon says the original fixing are tenax fittings, if you want to get some they are available from the supplier Namrick

    You would need the machine screw type to fix to the body.

    The later fixings are just normal press stud type fixings which Honda now supply.
    Last edited by Steve_M; 04-09-2017 at 03:25 PM.
    Steve M

    Its all gone Norfolk!!!
    Now in the Lotus position.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts