Results 1 to 1 of 1

Thread: Dead Speedo, Fuel and Temp Gauges - Revometer & lights are working

Threaded View

  1. #1
    Join Date
    Jun 2013
    Location
    Newcastle upon Tyne
    Posts
    51

    Question Dead Speedo, Fuel and Temp Gauges - Revometer & lights are working

    Fired the Beat up after the winter, and replacing a dead battery to find that the speedo, fuel and temp gauges are no longer working. The lights and revometer are working though. I have cleaned up the printed circuit on the back of the cluster and checked the screws and washers - everything seems to be very clean in there.

    Next, I checked the contacts in the connectors going in to the back of the cluster which also seem very clean.

    Any ideas what to check next?

    Edit - when I turn the key to pos1/accessory the warning lights come on as expected, but stay on until I start the ignition. I'm sure they used to go off after a few seconds
    Last edited by kungfuyou; 05-04-2019 at 09:34 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •