Results 1 to 5 of 5

Thread: E07A bore clearence??

  1. #1
    Join Date
    Nov 2002
    Location
    Mackay, QLD
    Posts
    412

    E07A bore clearence??

    A quick answer required for this one if anyone knows.

    What is the piston to bore clearence for the Beat engine??

    My block goes in the jig Tue, Doh!

    Tim
    If it ain't broke, take it apart and see how it works

  2. #2
    Join Date
    Aug 2002
    Location
    Kent
    Posts
    1,500
    0.2-0.4mm

    HTH
    Steve M
    __________________

    Its all gone Norfolk!!!
    Now in the Lotus position.

  3. #3
    Join Date
    Nov 2002
    Location
    Mackay, QLD
    Posts
    412
    thanks Steve
    If it ain't broke, take it apart and see how it works

  4. #4
    Join Date
    Nov 2002
    Location
    Mackay, QLD
    Posts
    412
    Steve,
    I passed that info on and the shop is saying that that clearence is HUGE.
    Sorry to have to ask, but are you sure, we are basicly saying a 1/4 to 1/2 a mil which does seem a little on the large side, that being said the pistons that came out weren't tight.

    Could you please confirm 0.2 - 0.4 mm

    Cheers
    Tim
    If it ain't broke, take it apart and see how it works

  5. #5
    Join Date
    Aug 2002
    Location
    Kent
    Posts
    1,500
    Sorry, my mistake.

    0.02 to 0.04mm

    not enough zeros
    Steve M
    __________________

    Its all gone Norfolk!!!
    Now in the Lotus position.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •