Right engine rebuild time just making sure I got certain parts right

Headbolt torque - does it need to be done in certain degrees? or just a case of when it's torqued to that spec then that's it?

http://www.u-ukhbc.co.uk/vbb/showthr...=7881#post7881

Timing

Cam pulley should have up mark like this

http://www.u-ukhbc.co.uk/vbb/showthr...=4783#post4783

Bottom end arrow

http://www.u-ukhbc.co.uk/vbb/showthr...=4693#post4693

Pointer and White mark on flywheel

http://www.u-ukhbc.co.uk/vbb/showthr...=4694#post4694

Putting the dizzy back in

http://www.u-ukhbc.co.uk/vbb/showthr...=4951#post4951
http://www.u-ukhbc.co.uk/vbb/showthr...=4952#post4952

Right bar that the 2 idler tensioner pulleys what torque do they need to be done up to? Other than that I think that is about it, engine is being dropped out and will be done on a workbench as the head from Mikei will be getting some mild work done at the same time.

Anything else I should be aware of at all?