Rusty Screws

[Dave]

Hi Eyeryone,

Please forgive if this is an old question but...

Phil very kindly sent me on a rear window (which I can see out of!!!) and I am in the process of replacing the old one.

The hood screws are fairly worn/rusty and I would like to know if anyone can recommend shiny new ones please?

I'm sure standard flat screws would be fine but shiny ones would be so much nicer...

Thanks,
Dave

[adrianp]

Hi Dave,

Best thing I can suggest it contact Phil again,

He will probably be able to come up with a suggestion, even if it is a case of remove one and pop down to your local B&Q (or simlar) to get a pack of stainless ones...

Let us all know how you get on as I'm sure others would like to do the same thing...

Hope this helps,

Adrian
UKHBC No.59
Ipswich

[Dion]

I have enquired about the hood screws at Honda.

They tell me that they're £18 each, that's EACH!

I think there's 11 in total, so that's a total of £198.

So be very careful when removing and putting them back in, they strip their threads very easily.

I'm trying to find an alternative and will let you know if I find something.

I'm thinking of putting star or allen bolts in as a security measure.

I suppose you can put any type of screw/bolt in, as long as you don't put your tonneau on when the roof is down.

You definately need the 2 press stud ones nearest the doors though, for when the roof is up.

The size of the bolts look like they are M5 X 20mm. But measure one first.

Dion

[adrianp]

Originally posted by Dion

I have enquired about the hood screws at Honda.

They tell me that they're £18 each, that's EACH!

I think there's 11 in total, so that's a total of £198.

Bl##dy Hel!......

Steve M, can you check this for everyone??

Although, knowing how Dealers work sometime that is probably what you will come back with also....

We have a company that comes in to do our fastners at work every now and again, If I remember when they next come in I'll see if they can come up with anything...

Adrian.

[Steve_M]

Hi All

There are 9 screws on the outside of the hood, 3 each side and 3 along the back.

And they are £2.24 each

HTH

Steve M

[adrianp]

Well thats a bit cheaper then Steve....

At that price, I'll probably have a new set myself soon as well...

£198 - £20.16 = £177.84 towards more bits for the car....

Ta for that steve

Adrian...

[Dion]

Hi Steve,

Thanks for clearing that up.

Dixon Honda told me they were £18. I said that's not bad for the full set, and they said they're £18 each.

I thought that was far too expensive.

I will be getting some too.

Thanks,

Dion

PS I think they meant the 2 fasteners nearest both doors that are £18 each.

[Dave]

Hi Steve,

Can you point me in the right direction to get these screws please or are they from your good self?

Thanks Everyone.

Regards,
Dave

[Midship]

Just wondering about the part number for these screws? I cant make out what number it is in the parts manual. Also is there a different number for the four inside? They are the exactly the same screw just a different length.

Thanks

[Adam]

PM sent

[Steve_M]

The ones that go round the edge of the rood are 90308-SS1-023 (item 15 on page 1- L15)

The ones inside on the back panel are 90313-SS1-013 (item 11 on page 1- L13)

Hope this helps

[Midship]

Thanks Steve!

Just wanted to be sure before I put in the order- I didn’t want to end up with the wrong ones!

P.s. thanks for the torque settings you sent me